Self

Basic Info.

Model NO.	Y/SZF
Application	Oilfield
Warranty	1 Year
Transport Package	Export Standard
Specification	2 1/5′′, 3 1/2′′, 4′′, 5 1/2′′, 7′′
Trademark	UPET
Origin	China
HS Code	8431431000
Production Capacity	10000 PCS Per Year

Product Description

Quick DetailsPlace of Origin:Shandong, ChinaModel Number:K344Type:Hydraulic SupportMachine Type:Drilling ToolCertification:APIMaterial:High Manganese SteelProcessing Type:ForgingUse:Well DrillingProduct:Packeruse:well drillingcertification:APItype:well drillingProcessing type:forgingMaterial:High Manganese steelCondition:NewPlace of origin:shandongModel type:K344Supply AbilitySupply Ability:3000 Set/Sets per MonthPackaging & DeliveryPackaging Details:wooden casePort:Qingdao or Tianjin

Introduction of Meet-Oil/Water Self-Inflatable Packer

During the drilling and completion process, traditional mechanical packers are usually used as the isolation operation of the down-hole rock layer, water layer, oil layer and gas layer, the process is complicated and need ground operation, difficult to operate, the sealing effect can not be guaranteed and difficult to sustain. For this reason, our company developed the meet-oil / water self-Inflatable packers, which can replace the traditional packers for completion and have the advantages of simple structure, easy to operate, cost saving, continuous sealing and automatic compensation gap, which are applicable for different stratum, environments, completing well craft, and pressure requirements of drilling and completion in both open hole and casing.The meet-oil or water self-inflatable rubber is finalized and fixed to a central tube with various dimensions through direct vulcanizing adhesion or sheathing, and a protective structure fastened by using a special device is adopted at both ends to protect its axial pressure bearing seal. The outer diameter and sealing length can be adjusted through well conditions, operating conditions and other special conditions.
Model Implication of Self-inflatable Packer
Y/SZF - XXX - XXX - XXXX - XXX Rated pressure difference Length of packer rubber tube
Outer diameter of packer rubber tube
Diameter of base tube
Code of packer type(meet-oil/water self-inflatable packer)

Main Application
Y/SZF self-inflatable packer is based on inflation of polymer materials in oil or water environment. Liquid hydrocarbon or water molecules enter a macromolecular structure so that inflatable rubber constantly inflates and the annular space outside the casing (or tubing) is sealed to reach the purpose of zonal packing. It is mainly used for segmented well completion, water zone packing, separate zone water injection, separate zone oil exploration, cementation and completion of open holes, intelligent well completion, auxiliary well cementation and sand prevention. It is widely applied to replace ordinary external casing packer and can achieve the purposes of effectively controlling fluid flowing, reducing effluent of reservoir stratum, exploring oil in different zones, increasing oil yield, reduce oil well development cost and meeting long-term reliable work requirement.

1. Segmented well completion: horizontal wells/large-displacement wells are packed by zone to implement segmented exploration;2. Water zone packing: earlier and later water plugging works can be implemented to isolate water producing layer. The plugging effect is good;3. Oil production by layer: packing and layering are carried out according to the oil producing position layout of production well to increase oil yield;4. Auxiliary well cementation: used at upper and lower parts of casing to solve the problem that the cementation between cement sheath and casing is poor to cause channeling, provide supplementary packing for channeling after well cementation, ensure sealing performance and improve well cementation quality;5. Simplified well cementation: the construction process is simple, the well completion process can be simplified, and the well construction period can be shortened;6. Segmented transformation of reservoir stratum: directly put into production after transformation without moving tubular columns;7. Intelligent well completion: combine tools such as slide bushing to realize intelligent well completion;8. Sand prevention: provide top channel plugging for horizontal gravel filler.9. Fracturing: Down-hole fracturing operation can be carried out according to the different fracturing requirements.

It has Following Advantages Compared with the Existing Down-hole Packing Technology:

1. High safety and reliability: the structural design is simple, no mechanical moving part exists, seat seals do not need pressurizing or lifting, no expert instruction is needed during site operation, the construction process is simple, low in risk and not easy to cause sand jamming, so that operation time can be effectively shortened, and development cost can be saved;2. Annular space gap can be automatically compensated: it has the ability of self inflation, self repair and automatic compensation in oil (water). The thermodynamic packer can constantly inflate to overcome the void caused by produced fluid erosion surface. When these failures cause loss, dynamic inflation can still finally realize sealing even at lower differential pressure. It is very suitable for open hole segments;3. Seat sealing can be carried out at underground static temperature condition: underground temperature change cannot cause changes in rubber size and tubular column stressing of the packer;4. Flexible structural composition: this packer has large drift diameter and considerable strength and is convenient for overhaul tools to access, and long horizontal well segments and casing window segments can be penetrated under the premise of ensuring effective work. When intelligent well completion equipment is installed, it can smoothly penetrate through the control pipeline, without accessing to the short transition segment;5. Well repair and underground works are eliminated, maintenance cost is reduced, and the life of oil wells is prolonged;6. Multiple model selection is suitable for high-temperature and high-pressure conditions of different well condition and application requirements;7. Completed well casing strings are landed immediately without occupying drilling time so that no bad influence or technical risk is caused;8. It replaces ordinary external casing packer for well completion so as to simplify well completion process, reduce well completion risk and reduce operation cost.
Use Methods and Precautions
1. After transporting the packer to the well site, store and use it as specified in the operating instructions;2. The protective film on the outer wall of the packer rubber shall be removed before going down to the well. Never remove it in advance to avoid long-term exposure from damaging rubber or advance inflation;3. The protective jacket for the connecting casing thread of the packer shall be removed before going down to the well to avoid damaging the thread. A thread sealing compound must be applied to the connecting thread before being connected with the casing;4. Make sure the pipeline is smooth before descending the packer into the well to ensure the packer is descended safely and smoothly;5. The descending position of the packer shall strictly follow the well completion design scheme;6. The packer shall be handled with care to avoid damaging the rubber;7. Pay attention to control the speed during descending. Never lift or lower abruptly to avoid damaging the rubber;8. Make sure the casing is descended within 24 hours to avoid the rubber from inflation in advance;9. The centering guide is designed according to field needs.
Packaging, Transportation and Storage
Packaging:1. Each water self-inflatable packer rubber is coated with one waterproof plastic film, the outer layer is coated with plastic braided fabric, and the entire packer is jacketed with a vacuum bag to isolate air;2. The packaging case is a wooden case. Each wooden case contains one or at most two packers; the packaging case contains certificate and operating instructions.Transportation:1. The packer shall be lifted according to identification during handling. Never lift the rubber position;2. During handling or transportation, the packer shall be handled with care against collision;3. Do protection well during handling or transportation of packer. Keep away from rain.Storage:1. The packer shall be stored according to storage regulations related to rubber products;2. The packer shall be stored in a clean ventilated place free of rain, snow and frost. Avoid long-term exposure under sun;3. The storage period of the packer does not exceed one year from the date of manufacturing.

Company Information
UPET OILFIELD EQUIPMENTS CO.,LTD is one of the most well-known suppliers for the oilfield equipments in China, was established in 2000, and now has grown up to a star company which is not big but very strong in this field with our persistant effort step by step in the past years.Our products refer to the whole areas of oilfields, from a very small spare part to a very big complete rig system. Our main products are: pump spare parts, mud pumps&packages, DC/AC Motors, solid control equipments, power units, truck-mounted rigs, workover rigs, land rigs, drilling pipes and drilling tools etc. All of our products are manufactured according to the API Standard, and we are authorized to use API monogram.Our products have been exported to 15 countries& areas around the world, 80% of our exsisting customers have done the business with us by more than 5 times, no one-off customer. We will continue to expand our range, and win more customers' trust with our better and better performance.We welcome the win-win cooperation relationship with the partners from any places in the world, each customer is our god and helper. Warmly welcome you to come to China and visit us!With us, you will save money, time, trouble, and most important point is that you can sleep better.